Femtosecond laser precision cutting machine for precision tubes

Equipped with high quality industrial femtosecond laser, good beam quality, small power fluctuation, with up to 9-axis motion control system, high-precision visual positioning system, detection system, automatic loading and unloading system, etc., to achieve fully automated and clean cutting of metal and non-metal tubes and pipes, with neat cutting edges, no burrs, no carbonisation.

Contacts 

Descriptions

Used in aerospace, biomedical, semiconductor, consumer electronics and other fields, suitable for interventional/implantable medical all kinds of metal thin-walled tubes, solid tubes of high-precision continuous processing.

Feature

Targeted optical path transmission design, good spot quality, can achieve clean cutting products, cutting edge without carbonisation, burr, no damage to the wall structure;

Cutting line width is small, low material loss, the whole product can be completely processed according to the required length, no waste material generated in the middle, no need to feed, significantly improve the processing efficiency higher single pulse energy, higher processing accuracy, can be almost any solid material to achieve fine processing;

Self-developed precision clamping system, equipped with high sensitivity tension sensing device, can automatically straighten and clamp the product to ensure that the product is not deformed and scratch-free;

Fully automated equipment, equipped with automatic/semi-automatic loading and unloading system, with unattended function.

Specification

Technical parameters	Model number
Form	Fully automatic
Lasers	Femtosecond laser
Centre wavelength	1030 nm/343nm
Output power stability	≤0.5% RMS @ 24 hours
Repeat Positioning Accuracy	X: s+2 um; Y: s2 um; Z: st2 um; A: s+2 arc sec
Diameter/wall thickness of tubular parts	Diameter 0.2 mm~5 mm/Wall Thickness T=0.02 mm~0.3 mm
Length of tubular parts	≤800 mm
Minimum cutting line width	≤20 um
Comprehensive machining accuracy	±10 um
Power supply specifications	Single-phase 220 V ± 10%, 50 Hz
Equipment power	7 kw /4 kw
Environmental requirements	Ambient temperature, 22 ± 3C; relative humidity: 55% ± 10%

Showcase

FAQ

more+What material can be micromachined with femto-second laser technology ?

Femtosecond lasers exhibit broader adaptability to various materials, including high-hardness, high-brittleness, and transparent materials that are difficult to process with conventional methods. We optimize laser wavelength, pulse energy, scanning speed, and other parameters based on the optical, physical, and chemical properties of the materials to achieve efficient and high-precision processing.Processable materials include:Metals and Alloys:Covering stainless steel, titanium alloys, copper/brass/bronze, tungsten carbide, nitinol, precious metals (palladium, iridium), hardened steel, etc. I...

more+What are the micro-machining capabilities of femotosecond laser technology?

Diameter/ Dimensions down to 20 µm or less;Size tolerances < 1µm;Straightholes (no taper);Thickness <2mm;Corner radius < 10µm;Surface quality / Homogeneity of the hole;No damages, no micro cracks;

more+What is a femtosecond laser?

1, IntroductionFemtosecond (Femtosecond,fs), also known as millimicroseconds, is 10^-15 s. Femtosecond lasers operate in the form of pulses with a duration of only 10-100 fs in general, which is the shortest pulse that can be obtained under the current state of the art. Because of this, once the femtosecond laser was born, it has been widely used in microscopic processes in the fields of physics, biology and chemistry, thus discovering many new ultrafast phenomena.2、FeaturesExtremely short pulse width: Pulse width refers to the duration of time when the laser power is maintained at a certain v...

Products

Femtosecond laser precision micro-hole drilling machine

Femtosecond Laser Carbonless Cutting Machine

Femtosecond laser submicron etching machine

Prescription

Precision Micro-hole Drilling Solutions

Carbonless cutting solutions

Sub-micron etching solutions

Contacts

Tel: 0086-755-23190051

Phone: +8619076121225

E-mail： laser_ops@szmono.cn