The best choice of machining technology for realizing straight-through holes of 20μm or less

There are major difficulties and challenges in making through holes with diameters below 20 μm using conventional methods. For example:1. Mechanical drilling- A...

MONO | 2024-07-12

High Precision Femtosecond Laser Processing: The Ideal Solution for Microvias, Fine Holes and Small Holes

Femtosecond laser equipment can be used to process micro, small and fine holes. Femtosecond laser technology is ideally suited for the processing of tiny and co...

MONO | 2024-07-10

Analysis of cutting technique of monochrome femtosecond laser in watch escapement wheel and escapement fork

The escapement wheel and the escapement fork are two vital components in a mechanical clock, responsible for transferring power to the balance wheel or spring s...

MONO | 2024-07-02

Precision Micromachining Technology: Application of Femtosecond Lasers to Dynamic Glucose Styli

An ambulatory glucose stylus is a medical device used to continuously monitor blood glucose levels. It is commonly used in diabetic patients to help them monito...

MONO | 2024-06-28

Monochrome Technology Femtosecond Laser: Precision Perforation, Cutting and Etching of Objective Mirror Diaphragms

An objective diaphragm is an important component in a microscope, light microscope or other optical instrument that controls the amount and path of the light be...

MONO | 2024-06-27

Precision microvia machining of printer printhead diaphragms by monochrome technology femtosecond lasers

A printer piezo printhead diaphragm is part of the piezo printhead in an inkjet printer and is used to control the ejection of ink droplets. Piezo printheads ut...

MONO | 2024-06-25

Monochrome Technology: Precision Processing of Diaphragms with Femtosecond Laser Technology

A diaphragm (or diaphragm) is an optical element, usually made of metal or optical material, used in optical systems to control the transmission and shape of li...

MONO | 2024-06-24

Monochrome Technology Femtosecond Laser for Hole Punching, Cutting and Etching Applications in Lenticular Processing

A grating is an optical element used to disperse and modulate light. It usually consists of a series of parallel grooves or projections, and these structures ar...

MONO | 2024-06-22

Laser perforation facilitates precision machining of microvias and small holes in ultra-thin molybdenum wafers

Molybdenum is widely used in the electronics and semiconductor industries, vacuum equipment and thermal management, aerospace and defence industries, chemical a...

MONO | 2024-06-18

Femtosecond laser micro-hole processing, precision cutting and micro-structure etching on probe cards

Semiconductor probe card is a key device used to test and verify the electrical performance of semiconductor chips. It is mainly used to perform electrical test...

MONO | 2024-06-15